Ideal performer for low wing beginners to stunt training!
Designed for compatibility with both GP and EP flight!

When its time to graduate from a beginner trainer, the next step could be this stylish low wing sports plane. The option of either EP or GP in the CALMATO ALPHA 40 Sports allows you to choose your preferred power source. Both embody the definitive stability of the CALMATO series with optimal maneuverability allowing low wing airplane beginners to fly stunts like loops and rolls. In addition, this kit is factory assembled and expertly pre-covered in quality film with printed coloring and Kyosho’s comprehensive design and construction ensures no gluing is required. The main wing halves are joined with an aluminum pin and can be separated for compact and easy transport. Motor mount, engine mount, tires, spinner and linkage parts are all included. Only a few separate items are needed to get airborne so it’s easy to enjoy the sporty flight performance of this conveniently priced low wing airplane.

Factory assembled airplane covered with vivid printed color. The lightweight design realizes calm controllability.

Includes motor mount with 25mm mounting hole pitch. Compatible with backplate mounted outrunner motors.

Standard 2-cycle 40～46 class engines can be installed without modification. A fuel resistant coating protects the interior for increased durability.

Features the aluminum pipe pin to join the main wing halves. Separate the wing halves for easy transportation. Smart wing fixture design requires no tool to bolt on the wing.

Independent aileron servos control each aileron. Functions as Flaperon when used with R/C system with mixing.

Tricycle landing gear allows stable landings and takeoffs. Rudder connected nose gear provides steering control on the ground.

Fuselage structure allows access to fuel tank and battery from the upper part of the nose section for easy maintenance access.

Conveniently sized but with plenty of space for access to the R/C system and linkages. Servo bed is fixed so no difficult steps remain to complete.

EP version / optimal "Team ORION Motor & ESC Set Avionics Flightpack 50 Airplane(No.ORI66801)"
  • Designed for the calm control ideal for newcomers to low wing airplanes.
  • Designed to be compatible with both EP and GP power sources.
  • No gluing required for completion.
  • Covered in printed film for a vivid color scheme.
  • Aluminum pipe pin joins the main wing halves. Can be separated for transport.
  • Vertical fin, servo bed, ailerons and rudder are all pre-installed.
  • Can be flown in training with a 4-cell battery in sports mode.
  • Lightweight balsa fuselage structure provides energetic flight performance.
  • Features rudder connected steering nose wheel.
  • Equipped with pre-installed flexible pipe for rudder and elevator linkage rods.
  • Includes pre-assembled fuel tank.
  • Includes spinner, linkage parts set and lightweight sponge tires.
  • Includes stylishly painted cowl for EP version. Creates different impression to the GP version.
  • painted pilot doll is assembled.

 

＜ Required for Operation ＞

  • R/C system/ 4-channel, 4-servo + ESC (EP), 5-servo (GP) for airplanes
  • Motor/ 600-1000W Backplate mounted Outrunner Brushless (EP)
  • Engine/ 2 cycle 40-46 class (GP)
  • Propeller/ D11 x P7-D12 x P8
  • Y-cord for aileron x 1
  • 200mm extension cord x 2
  • 14.8V-4,000-5,000mAh Li-Po battery (EP)
  • Charger compatible with LiPo balance charging (EP)
  • Fuel,Starthing tools (GP)
  • Batteries for receiver(GP)
  • EP version:If the battery cannot use the ESC BEC Power,aseparate Rx battery unit is requred.
  • EP recommended power unit set :No.66801 TEAM ORION AVIONICS Flight Pack 50 for airplanes(motor,ESC,propeller set).
Technical Data
Length 1,400mm
Width 1,600mm
Weight EP/2,650g approx. GP/2,550g approx.
Motor 600-1000W Backplate mounted Outrunner Brushless (sold separately)
Engine 2-cycle 40-46 class (sold separately)
Battery 14.8V-4,000-5,000mAh Li-Po
Wing Area 44dm2
Wing Load 56.8g/dm2-62.0g/dm2 approx.
Wing Type Original semi-symmetrical
Propeller D11 x P7-D12 x P8 (sold separately)